Bitmain Antminer L3++ 580MH PSU included (second hand)

Antminer L3++ Specifications:

1. Hash Rate:  580 MH/s ±5%
2. Power Consumption: 942W + 10% (at the wall, with APW3 ,93% efficiency, 25C ambient temp)
3. Power Efficiency: 1.62 J/MH + 10%(at the wall, with APW3 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip type: BM1485 (288 chips on four hashing boards, 72 chips on one hashing board)
6. Dimensions: 352mm(L)*130mm(W)*187.5mm(H)
7. Operating Temperature: 0 °C to 40 °C
8. Network Connection: Ethernet

Notes:

Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

A power supply unit is included. You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and all 2 are required. Above all do not connect more than one PSU to the same hashing board!

We like to inform you that one power supply supports one Antminer L3++.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. In addition only after all the 9 PCIE connectors are connected to the power supply you can power on the miner .